Loading...
Serving Edinburg, TX and surrounding areas. (956) 957-0016
Your warehouse, shop, or facility floor takes a different kind of beating than a residential garage. We install commercial-grade epoxy systems that hold up to traffic, equipment, and the South Texas climate - without cutting corners on prep.
Commercial and industrial epoxy floor coatings in Edinburg use heavier-duty coating systems applied in multiple layers to concrete that has been mechanically ground and tested - most commercial projects take two to four days depending on the size of the space and the condition of the existing slab.
A facility floor sees forklifts, pallet jacks, heavy foot traffic, chemical spills, and constant abrasion. A residential epoxy product applied over a lightly prepped surface will not survive that environment for long. Commercial systems use thicker coats, more robust chemistry, and often incorporate anti-slip additives to meet the demands of an active facility without becoming a liability.
Edinburg and the broader Rio Grande Valley have seen significant warehouse and logistics growth tied to cross-border trade, which means more facilities are investing in coatings for new and existing spaces. We also install urethane cement flooring for environments like commercial kitchens or cold storage where epoxy alone may not be the right fit.
If you can see cracks, small chunks breaking away, or rough patches where the concrete has started to deteriorate, the floor is past the point where cleaning alone will help. In Edinburg, the clay soils underneath many slabs shift with the wet and dry seasons, accelerating surface breakdown over time. An epoxy coating applied after proper repairs seals and stabilizes the surface so it stops getting worse.
Bare concrete is porous - oil, chemicals, and other liquids soak right in and are nearly impossible to fully remove. If your facility floor has dark stains that do not come up with mopping, the concrete is absorbing everything that lands on it. A properly sealed epoxy surface stops that absorption entirely. Spills sit on top and wipe up cleanly, which also matters for compliance and inspections.
Concrete that has not been sealed sheds a fine dust that settles on equipment, shelving, and anything stored on the floor. In Edinburg's warm, humid climate, this process happens faster because moisture moves through the slab more readily. If you are constantly cleaning and still finding a film of dust on everything, the floor itself is the source.
If you already have a coating that is starting to separate from the concrete - especially along seams, near drains, or in high-traffic lanes - that is a sign the original job was not done correctly or the coating has reached the end of its life. Peeling edges are not just cosmetic; they create trip hazards and allow moisture to get underneath, which speeds up the damage significantly.
We install multi-layer epoxy systems for warehouses, logistics facilities, manufacturing shops, auto service bays, retail spaces, and commercial kitchens across Edinburg and the Rio Grande Valley. Every job starts with mechanical surface preparation - we grind or shot-blast the concrete to the profile required for the coating system being installed. For facilities where downtime is costly, we coordinate scheduling around your operations rather than asking you to work around us.
For facilities that want a polished look alongside commercial-grade protection, we also offer garage floor coatings for attached or stand-alone garages on commercial properties - useful for service fleets, dealerships, or facilities with vehicle bays separate from the main production floor. Each option is scoped based on the actual traffic, chemical exposure, and load requirements of your space, not a one-size-fits-all package.
Multi-layer epoxy systems rated for forklift traffic, pallet loads, and high foot volume across large square footage.
Chemical-resistant coatings for auto service, fabrication, and light manufacturing environments in Edinburg.
Seamless, non-slip coatings for food service, cold storage, and other environments with specific slip and chemical resistance requirements.
Edinburg sits in the Rio Grande Valley, where summer temperatures regularly exceed 100 degrees and the area's agricultural history means groundwater sits relatively close to the surface in many parts of Hidalgo County. Concrete slabs in this environment tend to hold more moisture than slabs in drier parts of Texas - which makes the pre-installation moisture test especially critical for commercial applications. Skipping that test is not just a best-practice issue here; it is a near-guarantee of coating failure within the first year. We test every slab before any product goes down, and if moisture levels require a barrier coat first, we say so upfront and include it in the estimate.
The commercial and industrial growth in this region also means contractor schedules fill faster than they used to. Business owners in McAllen and Mission are booking the same fall and winter installation windows that work best for Valley conditions. Reaching out early - especially for larger facilities where prep and coating span multiple days - gives you more flexibility on timing and minimizes disruption to your operations.
We ask about the size of the space, current use, and any known issues - cracks, previous coatings, moisture concerns. Most business owners can give us enough to provide a rough range before we visit. We respond within one business day.
We walk the floor, look for damage and old coatings, and test for moisture - which is especially important in Edinburg. After the visit you receive a written estimate that breaks down prep, materials, and any additional work like moisture mitigation or crack repair.
The space must be cleared before work begins. We grind or mechanically profile the concrete, fill and stabilize any cracks, and address moisture if needed. This is the step most contractors rush - it is also where the job is won or lost.
Epoxy goes down in layers, with dry time between each. Light foot traffic is possible within 24 hours. Heavy equipment should stay off the floor for 48 to 72 hours - sometimes longer in Edinburg's heat. We give you a specific timeline before we leave so you can plan reopening accurately.
We will walk your facility, test the slab, and give you a written estimate that breaks down exactly what is included. One business day response, no obligation.
(956) 957-0016We grind or shot-blast every floor to the correct surface profile before any coating goes down. A coating applied to a poorly prepared surface will peel - regardless of the product. This step takes time and costs more to do right, which is why some contractors skip it. We do not.
High water tables and agricultural irrigation history mean many Edinburg slabs carry more moisture than their owners expect. We test every commercial slab before starting. If a moisture barrier is needed, we include it in the scope from the beginning rather than calling it an extra after the job starts.
We coordinate around your operating hours rather than the other way around. For most facilities, we can schedule prep and coating over a weekend so you are not losing productive time during the week. You get a clear timeline before we start - not a rough estimate that keeps moving.
You can verify our license through the Texas Department of Licensing and Regulation before signing anything. In a growing market like Edinburg, where contractors are coming in from across the region, a verifiable license with insurance behind it is the difference between real recourse and none at all if something goes wrong.
Every project in the Rio Grande Valley comes with the same conditions: heat, clay soil movement, and moisture pressure from below. We know how to account for those factors before the first coat goes down, which is why the floors we install hold up the way they are supposed to.
Dedicated garage floor coating systems for residential and commercial vehicle bays, with options for color, finish, and anti-slip texture.
Learn MoreA step up from standard epoxy for environments with thermal cycling, heavy chemical exposure, or moisture pressure from below.
Learn MoreSpots fill up fast - reach out now to lock in your estimate and get your facility floor scheduled before the summer heat returns.