Loading...
Serving Edinburg, TX and surrounding areas. (956) 957-0016
Tired of a dull, stained concrete floor? Metallic epoxy gives you a custom, one-of-a-kind finish that handles South Texas heat and cleans up in minutes.
Metallic epoxy flooring in Edinburg, TX is a thick, glossy coating poured over your existing concrete slab, using metallic pigments that swirl into a unique three-dimensional pattern, most jobs take two to three days from surface prep through final topcoat.
A lot of Edinburg homeowners come to us after years of fighting stained, dusty concrete in their garage or covered patio. The surface looks rough, nothing stays clean, and regular sealers wear off fast under the South Texas sun. Metallic epoxy solves all of that at once - you get a sealed, hard surface that wipes down easily and keeps its gloss. If you are also looking at a standard epoxy floor coating for a more budget-friendly option, we can walk you through both during your estimate visit.
No two metallic epoxy floors look exactly alike. The installer controls the swirl pattern during application, so you end up with something that is entirely your own - not the same floor your neighbor has.
If your garage or patio floor has oil stains, rust marks, or a rough, pitted surface that scrubbing never fully fixes, the concrete is ready for a new finish. Bare concrete in Edinburg's climate absorbs motor oil and dirt deeply over time. A metallic epoxy coating seals the surface completely, so future spills wipe right up.
Edinburg's clay-heavy soils shift with the seasons, and that movement shows up as hairline cracks or flaking patches in concrete floors. If you are noticing these in your garage, utility room, or covered patio, it is worth having a contractor assess the floor before the damage worsens. Small cracks can be repaired and sealed under a new coating.
Bare concrete naturally sheds fine dust, and in Edinburg's dry, windy conditions that dust gets tracked through the house constantly. If you sweep your garage regularly and still find grit everywhere, a sealed metallic epoxy floor eliminates the problem. The coating locks the surface so it cannot shed particles.
If a previous floor coating is lifting at the edges or bubbling in spots, that is a sign moisture is pushing up through the slab - a very common issue in Hidalgo County homes. A proper metallic epoxy installation starts with moisture testing and surface grinding, which prevents this from happening again. Coating over a failing floor without fixing the cause will produce the same result.
We install metallic epoxy in garages, living rooms, covered patios, commercial showrooms, and anywhere else you want a floor that stands out. The process starts with proper surface prep - grinding or shot-blasting the concrete so the epoxy bonds correctly - then a primer coat, the metallic base coat, and a clear protective topcoat. For outdoor spaces like covered patios, we use a UV-resistant topcoat specifically rated for South Texas sun exposure, which is different from what goes on an interior floor.
If you need something even faster-curing for a space you cannot be out of for long, ask us about our urethane cement flooring option, which also handles heat and moisture well. For spaces where looks matter but you want a more straightforward finish, standard epoxy floor coatings may be the right fit. We will help you pick the product that makes the most sense for your space, your slab condition, and your budget.
Suits garages, living areas, gyms, and home offices where you want a polished, custom look with easy daily cleaning.
Suits covered patios, carports, and semi-outdoor spaces that need a topcoat formulated to resist South Texas UV and temperature swings.
Suits any space where safety matters - laundry rooms, pool areas, or any floor that will get wet - without sacrificing the glossy finish.
Suits retail spaces, dealerships, and commercial interiors where an eye-catching floor creates the right first impression for customers.
Edinburg's climate is hard on floor coatings. Summer temperatures push well past 100 degrees, humidity from the Rio Grande Valley works moisture up through concrete slabs, and the clay-heavy soil in Hidalgo County shifts with every wet and dry cycle - creating hairline cracks in floors that were poured perfectly flat. A metallic epoxy system installed correctly accounts for all of this: we test for moisture, fill active cracks, apply a primer designed for concrete with vapor transmission, and finish with a topcoat rated for the UV levels we see here. That is a different process than what a general contractor in a cooler climate might follow, and it matters for how long your floor holds up. Homeowners near McAllen and Mission deal with the same conditions, and we apply the same standard to every job across the Valley.
Edinburg homeowners also tend to use their covered patios and carports year-round - it is one of the best things about living here. Metallic epoxy is increasingly the finish of choice for those spaces because it is seamless, has no grout lines to scrub, and stands up to the foot traffic, outdoor furniture, and occasional rain splash that those areas get. It also gives an outdoor living space a polished look that tile or painted concrete rarely achieves. The result is a space you actually want to spend time in, not just tolerate.
Tell us the space, rough size, and what you are hoping for. We reply within one business day and schedule an estimate visit at your convenience - no pressure, no obligation.
We visit your home, measure the space, check for cracks, and test the slab for moisture. The visit takes 30 to 60 minutes. You receive a written quote that breaks out prep work, coating, and topcoat separately.
Day one is all preparation. We grind the concrete surface, fill any cracks, and apply a primer coat. The floor will look rough at the end of this day - that is correct and expected.
Day two is the metallic coat and topcoat. Light foot traffic is safe after 24 hours. We do a final walkthrough before we leave so you can flag anything while we are still on-site.
Free estimate, written quote, no obligation. We reply within one business day.
(956) 957-0016We test your slab for vapor transmission before any coating goes down - not after. In Hidalgo County's clay soils, skipping this step is the single biggest reason metallic epoxy floors fail early. If moisture is present, we address it as part of the job.
We use topcoat formulations rated for the UV levels common in the Rio Grande Valley - important for covered patios and any space with sun exposure. Standard interior coatings yellow quickly here. We choose the right product for your specific application.
We walk your slab before we quote, identify any concrete issues upfront, and include them in the written price. The number you approve is the number you pay. We do not add on "repairs we found along the way" after work begins.
Texas requires contractors to be registered with the Texas Department of Licensing and Regulation (TDLR). We meet state requirements and carry liability coverage, which protects you if something unexpected happens on the job.
Every one of these points connects to the same thing: a floor that still looks good in five years, not one that needs to be redone in two. That is what we are here to deliver.
A seamless, heat-tolerant coating built for spaces that deal with moisture, heavy use, and South Texas temperature swings.
Learn MoreDurable, solid-color epoxy coatings for garages, basements, and commercial floors - a cost-effective alternative to metallic finishes.
Learn MoreOur calendar fills fast in the cooler months - contact us today and lock in your start date before the schedule fills.